![background image](http://html.mh-extra.com/html/makita/3901/3901_instruction-manual_230019006.webp)
6
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Plate Joiner
Model No./ Type: 3901
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA010-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
GEB020-3
PLATE JOINER SAFETY
WARNINGS
1.
Blades must be rated for at least the speed
marked on the tool.
Blades running over rated
speed can fly apart and cause injury.
2.
Always use the guard.
The guard protects the
operator from broken blade fragments and
unintentional contact with the blade.
3.
Hold power tool by insulated gripping
surfaces, because the blade may contact its
own cord.
Cutting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4.
Use only the blades specified for this tool.
5.
Never operate the tool with the blade locked in
exposed position or without the blade cover
secured properly in place.
6.
Make sure that the blade slides smoothly
before operation.
7.
Check the blades carefully for cracks or
damage before operation. Replace cracked or
damaged blades immediately.
8.
Make sure that the flange fits in the arbor hole
when installing the blade.
9.
Inspect for and remove all nails or foreign
matter from the workpieces before operation.
10.
Always place the workpieces on a stable
workbench.
11.
Secure the workpieces firmly with clamp or
vise.
12.
NEVER wear gloves during operation.
13.
Hold the tool firmly with both hands.
14.
Keep your hands and body away from the
cutting area.
15.
Run the tool for a while without the blade
pointing toward anybody. Watch for vibration
or wobbling that could indicate poor
installation or a poorly balanced blade.
16.
Never reach your hands underneath the
workpieces while the blade is rotating.
17.
Do not leave the tool running unattended.
18.
Always be sure that the tool is switched off
and unplugged before making any
adjustments or replacing the blade.
Содержание 3901
Страница 53: ...53 ...
Страница 54: ...54 ...
Страница 55: ...55 ...
Страница 56: ...56 Makita Corporation Anjo Aichi Japan www makita com 883857C925 ...