9 ENGLISH
8.
Do not nail, cut, crush, throw, drop the battery
cartridge, or hit against a hard object to the
battery cartridge.
Such conduct may result in a
fire, excessive heat, or explosion.
9.
Do not use a damaged battery.
10.
The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11.
When disposing the battery cartridge, remove
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12.
Use the batteries only with the products
specified by Makita.
Installing the batteries to
non-compliant products may result in a fire, exces
-
sive heat, explosion, or leak of electrolyte.
13.
If the tool is not used for a long period of time,
the battery must be removed from the tool.
14.
During and after use, the battery cartridge may
take on heat which can cause burns or low
temperature burns. Pay attention to the han-
dling of hot battery cartridges.
15.
Do not touch the terminal of the tool imme-
diately after use as it may get hot enough to
cause burns.
16.
Do not allow chips, dust, or soil stuck into the
terminals, holes, and grooves of the battery
cartridge.
It may result in poor performance or
breakdown of the tool or battery cartridge.
17.
Unless the tool supports the use near
high-voltage electrical power lines, do not use
the battery cartridge near high-voltage electri-
cal power lines.
It may result in a malfunction or
breakdown of the tool or battery cartridge.
18.
Keep the battery away from children.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4.
When not using the battery cartridge, remove
it from the tool or the charger.
5.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
►
Fig.1
1
Switch trigger
2
Lock button
3
Lamp switch
4
Lamp
5
Trigger-lock button
6
Speed mode changing knob
7
Air drain
8
Filler port plug
9
Flexible hose
10
Adapter
11
Strap hole
12
Battery cartridge
13
Barrel
14
Rod handle
15
Hose holder
16
Pressure relief valve
17
Shoulder strap
-
-
Содержание 0088381886772
Страница 3: ...1 Fig 6 1 Fig 7 1 Fig 8 1 Fig 9 1 2 Fig 10 1 2 Fig 11 1 2 1 2 Fig 12 3 ...
Страница 4: ...1 2 3 Fig 13 1 2 Fig 14 Fig 15 Fig 16 1 Fig 17 Fig 18 1 3 2 Fig 19 5 1 2 3 4 Fig 20 4 ...
Страница 5: ...Fig 21 1 Fig 22 Fig 23 Fig 24 Fig 25 1 2 Fig 26 1 3 4 5 2 Fig 27 1 3 2 Fig 28 5 ...
Страница 6: ...1 2 Fig 29 Fig 30 1 2 Fig 31 1 Fig 32 Fig 33 1 2 Fig 34 1 Fig 35 6 ...
