Makita 0088381840538, Инструкция по эксплуатации

Страница: 5 / 60

5 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: TL064D
Fastening capacities Machine screw 4 mm - 8 mm
Standard bolt M4 - M12
High tensile bolt M4 - M8
No load speed 0 - 2,000 min
-1
Impacts per minute 0 - 3,000 min
-1
Maximum fastening torque 60 N•m
Overall length 361 mm - 380 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD
Net weight 1.2 - 1.6 kg
Model: TL065D
Fastening capacities Standard bolt M4 - M12
High tensile bolt M4 - M8
Square drive 9.5 mm
No load speed 0 - 2,000 min
-1
Impacts per minute 0 - 3,000 min
-1
Maximum fastening torque 60 N•m
Overall length 361 mm - 380 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD
Net weight 1.2 - 1.6 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Intended use
The tool is intended for screw driving in wood, metal and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model TL064D
Sound pressure level (L
pA
) : 91 dB(A)
Sound power level (L
WA
) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model TL065D
Sound pressure level (L
pA
) : 90 dB(A)
Sound power level (L
WA
) : 101 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).