Makita 0088381601931, Инструкция по эксплуатации

Страница: 10 / 60

10
NOTE:
• Make sure filter is put on straight without being peeled
back. If filter is put on incorrectly as shown in diagram,
dust will get into motor housing, and cause motor fail-
ure.
(Fig. 9)
Connect prefilter. At this time, make sure to twist prefilter
so that securing lip is firmly locked into cleaner unit.
(Fig. 10 & 11)
Connect capsule. Align projection on capsule with
projection on handle and then firmly twist capsule in
direction of arrow until it is secured.
(Fig. 12 & 13)
NOTE:
• Always remove dust ahead of time, as suction power
will be reduced if there is too much dust in cleaner.
• Always be sure to check that both filter and prefilter are
loaded correctly prior to using cleaner. If they are not
loaded correctly, dust will get into the motor housing,
and cause motor failure.
If the following examples occur, filter and prefilter are
not loaded correctly. Reload them correctly to rectify
problem.
Problem Examples
Example 1: Only prefilter has been loaded (no filter)
(Fig. 14)
Example 2: Only filter has been loaded (no prefilter)
(Fig. 15)
Example 3: Filter has been loaded in a peeled back state
(Fig. 16)
Example 4: Prefilter’s securing lip is not firmly locked into
groove of cleaner housing
(Fig. 17)
OPERATION
CAUTION:
• To connect attachments, such as nozzle, twist-insert
attachment in direction of arrow to ensure secure con-
nection during use. To disconnect attachment, twist-
extract also in direction of arrow.
If attachment is twisted in the opposite direction, when
being connected or disconnected, capsule may
become loose.
(Fig. 18)
• Keep away end of your hair, scarf, shawl, etc. from
the exhaust vents.
They may be entangled in the
motor and cause injury. (Fig. 19)
Cleaning (Suction)
Nozzle (Fig. 20)
Attach the nozzle to clean off tables, desks, furniture, etc.
Nozzle slips on easily.
Extension wand (Straight pipe) (Fig. 21)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for
cleaning a floor while standing erect.
Corner nozzle (Fig. 22)
Fit on the corner nozzle for cleaning corners and
crevices of a car or furniture.
Corner Extension wand (Straight pipe)
(Fig. 23)
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.
Cleaning without nozzle (Fig. 24)
You can pick up powder and dust without nozzle.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off before
attempting to perform inspection or maintenance.
After use (Fig. 25 & 26)
When storing the cleaner, lock the nozzle head, and
hang it from a hook available in the market.
CAUTION:
• Putting the cleaner against the wall without a hook may
cause the cleaner to fall down and be damaged.
Cleaning
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/paper pack
mounting area and the dust stopper.
(Fig. 27)
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Wash the filter in soapy water when it is clogged with
dust and the cleaner power becomes small. Dry it out
thoroughly before use. An insufficiently dried filter may
cause poor suction and shorten the service life of the
motor.
(Fig. 28)
Things to Check Before Asking for Repairs
010051
NOTE:
• Do not attempt to repair cleaner by yourself.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
Symptom Area to be investigated Fixing method
Weak suction power
• Is capsule full of dust? • Empty dust from capsule.
• Is filter clogged? • Dust down or wash filter.
• Is the battery cartridge discharged? • Recharge battery.
Not working • Is the battery cartridge discharged? • Recharge battery.