MAKINEX MS-100, Руководство оператора, Страница: 11 / 16

MAKINEX MS-100
– Operator’s
Manual Page 11 of 16
3. Attach MS-100
‘Clamp Arm’
into the
‘
Slide Arm Colla
r’
of the MS-100 Frame; tighten
‘Collar Latch’
in place.
4. When fitting a mixer, make sure the slider
’
s opened, fit it through the gap from the front
end and then position the collar part of the mixer between the mixer clamp and tighten
NOTE: Always grab the mixer by the handles,
Make sure the mixer is securely tightened, but do not over-tighten!
Slide Arm
Collar
Clamp Arm
Collar
Latch
Adjustable Slider Clamp
Clamping
lever