JHT-U-2
– User Manual REV0919
Page
1
of
17
INTRODUCTION
Thank you for purchasing a MAKINEX product.
This manual provides information and procedures to safely operate and maintain the
JHT-U-
2
Jack Hammer Trolley. For your own safety and protection from injury, carefully read,
understand, and observe the safety instructions described in this manual.
Keep this manual or a copy of it with the machine. If you lose this manual or need an
additional copy, please contact MAKINEX. This machine is designed and built with user
safety in mind; however, it can present hazards if improperly operated and serviced. If there
are any questions regarding operating or servicing of this machine, please contact
MAKINEX.
All rights, especially copying and distribution rights are reserved.
Copyright 2019 by MAKINEX.
No part of this publication may be reproduced in any form or by any means, electronic or
mechanical, including photocopying, without express written permission from MAKINEX.
Any type of reproduction or distribution not authorised by MAKINEX represents an
infringement of valid copyrights and will be prosecuted. We expressly reserve the right to
make technical modifications, even without due notice, which aim at improving our machines
or their safety standards.
DISCLAIMER
MAKINEX and its affiliates take no responsibility for any damage, injury or death resulting
from the incorrect or unsafe use of this product. Use of this product should be undertaken by
compet
ent persons only. It is the operator’s responsibility to ensure that the following safety
procedures are followed. If you are unsure, do not operate this product.
Record the model and serial numbers as well as date and place of purchase for future
reference. Have this information available when ordering parts and when making technical or
warranty inquiries.
MAKINEX SUPPORT
Refer to contact details on pg. 12
MODEL NO.
JHT-U-2
SERIAL NO.
DATE OF PURCHASE
PURCHASE LOCATION
