MAKINEX Hose2Go, Руководство оператора

Страница: 12 / 16

HOSE2GO
– USER MANUAL
Page 10 of 14
TROUBLESHOOTING
TROUBLE SHOOTING GUIDE
PROBLEM CAUSE REMEDY
Pump does not fill
Valve faulty Inspect valve on hose
Blockage in hose
Remove hose from Hose2Go and
flush with tap water from either end
Check for blockages at barbed
fittings
Blockage in top cap Inspect inlet for debris
Irregular variations in
pressure
Machine being used has
blockage
Refer to applicab
le machine’s
operator manual
Valves blocked by debris Clean the valves
Air in system
Follow instructions on device to fill
from empty
Hose blocked by debris
Remove hose from Hose2Go and
flush with tap water from either end
Pressure drop
Tank empty
Fill following procedure in manual/
and on Hose2Go
Blockage in hose
Remove hose from Hose2Go and
flush with tap water from either end
Faulty valve Inspect valves for blockages/damage
Water leaking from main
housing
Ruptured bladder
Return to MAKINEX service
department
Cracked housing
Return to MAKINEX service
department
Water accumulated whilst
stowed on side
When stowed on side or upside-
down water can accumulate in upper
housing. This is normal do not
confuse with leaking.