Page 16 of 44
OPERATION
OIL LEVEL CHECK
CAUTION
Check the engine oil level with the engine stopped and in a
levelled position
1. Clean area around oil fill and remove oil cap.
2. Check the dipstick to ensure there is enough
oil.
3. If there is not enough oil, using oil funnel
(optional), slowly pour contents into oil fill
opening.
4. Replace oil fill cap and tighten.
NOTE:
Refer to Vanguard 400 Manual for more in-depth instructions
NOTE:
New machines will be pre-oiled from MAKINEX with:
Engine Oil
– SAE 10W-30
NOTE:
IMPROPER treatment of generator
can damage it and shorten its life. DO NOT
attempt to start the engine before it has been
properly serviced with the recommended oil.
This may result in an engine failure.
Содержание DPW-4000-VS
