Makim T2500D SINGLE 3, Руководство пользователя

Страница: 6 / 9

Installation-Mounting
Mounting kit supplied as standard along with the turnstiles
consists of studs and washers Follow the procedure below for
installation:

Mark the hole places on the ground in which the turnstile will
be mounted.

Drill 8 cm deeped marked mounting holes by 12mm drill top
as using drill and hilt.

Fix the steel anchors to the drilled holes. If the ground is not
strong, fix the steel anchors using chemical soil mixture
(recommended one is Hilti HIT HY 150). Wait 20 minutes for
hardening of chemical soil mixture.
6

Concrete thickness should be at least '400 mm'.

Concrete edge dimensions should be at least '100 mm' longer than the turnstile dimension.