To reduce the risk of fire or electric shock, do not expose this equipment to rain or
moisture. Do not place objects filled with water such as a vase or the like, on top
of or inside the apparatus.
The 3D-printer enclosure is not intended to be used as a stepping object or table;
objects may be placed on top of the enclosure that amount to no more than a
total of 5 lbs.
The preinstalled filtration system consists of a high-speed fan that is not intended
to be obstructed by any objects other than the HEPA/Carbon filter attached and
provided by Makergadgets. Any other type of filter or obstruction not provided by
Makergadgets may reduce the life of the fan or destroy it altogether.
The fan is not blocked in any way other than the filter, so careful handling must be
taken when changing filters. Enclosure must be unpowered and unplugged before
removing filter.
As with any high-speed rotational object, fingers should be kept out of the fan
when under operation or when enclosure is plugged in.
Interior parts are made from PLA and thus should not be exposed to temperature
above 60
o
C (140F). Testing was completed with 6-hour prints using ABS and PETG
extruded at 240
o
C (464F) and the enclosure maintained temperatures below 40
o
C
(104F).
Do not transport or move enclosure with Printer inside. First remove printer, then
replace printer after enclosure in new work area.
WARNING AND SAFETY INSRUCTIONS