MakerBot Replicator+, Быстрый старт

Страница: 5 / 14

On the
​
control panel
​
, select
​
Filament > Unload Filament.
The Smart E will now start to heat up. Remove the filament from
the extruder only when prompted by the control panel. Attempting to
remove the filament prematurely will damage the machine.
4.
​
Open the filament drawer by pushing down on the tab in the photo
below and pulling up on the drawer.
5.
​
Once lifted up as shown in the photo below, the drawer will stay in
place.