MakerBot Labs Experimental Extruder Скачать руководство пользователя страница 4

Страница: 4 / 6

STEP SIX:

Loosen the Nozzle with the two
Nozzle Wrenches but do not
completely remove — allow the
Nozzle to cool.

STEP SEVEN:

Once the loosened Nozzle has
cooled, remove it completely,
then screw on the replacement
Nozzle of choice and
hand-tighten.

STEP FIVE:

Use the small side of the
second Nozzle Wrench to grasp
the Nozzle.

PAGE 4

EXPERIMENTAL EXTRUDER CONFIGURATION AND NOZZLE CHANGING GUIDE

Содержание Labs Experimental Extruder

Страница 1: ...CONFIGURATION AND NOZZLE CHANGING GUIDE NOTE The Experimental Extruder is an experimental product and is not covered under warranty or MakerCare ...

Страница 4: ...e Nozzle to cool STEP SEVEN Once the loosened Nozzle has cooled remove it completely then screw on the replacement Nozzle of choice and hand tighten STEP FIVE Use the small side of the second Nozzle Wrench to grasp the Nozzle PAGE 4 EXPERIMENTAL EXTRUDER CONFIGURATION AND NOZZLE CHANGING GUIDE ...

Страница 5: ... and print STEP EIGHT Heat the Experimental Extruder on your 3D printer using the Preheat function then place the Experimental Extruder back into the Experimental Extruder Jig and wrench tighten the Nozzle one additional 40 turn PAGE 5 EXPERIMENTAL EXTRUDER CONFIGURATION AND NOZZLE CHANGING GUIDE For additional resources and up to date information visit MakerBot com Labs ...

Страница 6: ......