B O T M O B I L E
14
Insert the M3x30 Cap Hexagon Socket Screw into the gearbox shell from the outside.
Apply some grease to the screw and install the drive gear as shown above.
Place the motor mount onto the outer gearbox shell as shown above (check the
position of the motor pinion gear and adjust its position on the motor axle if
necessary). And secure the 2 parts together with the previous installed M3x30 (tighten
the screw only till it comes out of the other side of the motor mount) in the middle and
the M3x10 Cap Hexagon Socket Screw at the outer end as shown above.
Install the other outer gearbox shell and completely tighten the M3x30 screw.
Carefully check that the gears can spin and adjust of necessary.
