UDD-SD-116/
Release Date: 31.12.2014/Rev No: 1/Rev.
Date
: 27.04.2015
31
4.6.6 Output Frequency Setting in CUCF Mode
1.
Output frequency only can be set when CUCF mode is ON.
2.
In STDBY mode, enter the setting interface. Press and hold the function setting key
for
more than 2 seconds, then come to setting interface, Press and hold the inquiring key (
,
)
for
more than half a second(less than 2 seconds), select the function setting, choose
battery voltage
setting interface, at the moment, the letters “OPF” will flash.
3.
Enter the OPF setting interface. Press and hold the function setting key
for more than
half a second(less than 2 seconds), then come to setting interface of OPF, at this time, the
letters “OPF” will not flash any more. The “OFF” (or 50HZ, 60HZ) will flash. Press and hold the
inquiring key (
,
)
for more than half a second (less than 2 seconds) to determine
whether the CF function is
used or not. If used, select 50HZ or 60HZ according to you. It is
determined by yourself, the default value is 50HZ.
4.
Confirm the OPF selecting interface. After selecting 50HZ or 60HZ, press and hold the
function
setting key
for more than half a second (less than 2 seconds). Now, the OPF
setting function
is completed and the “50HZ” or “60HZ” will light without flash.
5.
Exit from the setting interface. Press and hold function setting key
for more than 2
seconds,
exit from the setting interface and return to main interface.
4.6.7 IP Setting
1.
① Enter the setting interface. Press and hold the function setting key
for more than 2
seconds, then come to setting interface, press and hold the inquiring key (
,
)
for more
than half a second(less than 2 seconds), select the function setting, choose output voltage setting
interface, at the moment, the letters “Id” will flash.
2.
② Enter the output voltage setting interface. Press and hold the function setting key
for
more than half a second(less than 2 seconds), then come to setting interface of ID, at this time,
the letters “Id” will not flash any more. The numerical value next to the “Id” will flash. Press and
hold the inquiring key (
,
)
for more than half a second (less than 2 seconds), select the
