MAKELSAN POWERPACK PRIME SERIES, Руководство пользователя

Страница: 25 / 36

POWERPACK PRIME SERIES 1-3 kVA
24
4.2 Typical Troubleshooting
If the LCD display shows any abnormal code, and the buzzer is alarming, that means UPS is
running under abnormal status; please firstly analyze and resolve the problem by using ”The
common troubleshooting table”, if the problem can’t be solved, please contact with distributor or
service center.
The abnormal codes include warning codes and fault codes:
A:
Fault code shown as right picture below for example. All the Fault codes begin with capital ‘F’
character.
B
: Warning code shown as left picture below for example. All the warning codes begin with
capital ‘A’ character.
The common troubleshooting table:
Warning/f
ault code
Buzzer alarm Signification Correction method
A04
Decide by other
warning
Line abnormal Input line abnormal, wait for line resume
A07
Beep every 2
minute L/N connection
reverse Please check L/N and the ground
connection is OK
A08
Decide by other
warning
Bypass abnormal Input line abnormal, wait for line resume
A10
Beep every 1
second Battery abnormal
or disconnect
Please check battery connection is OK
A11
Beep every 1
second Battery voltage
low
Please re-charger battery before use, if
battery damaged, please contact to service
people
A12
Continuously
beep Battery voltage
over charged
Belong to UPS normal protection behavior
A15
Beep every 1
second
Overload warning
Please check the power connected to UPS,
and load off the unnecessary device
A16
Beep every 1
second
Fan abnormal
Please contact the distributor or service
center
A18
Continuously
beep
Charger abnormal
Please contact the distributor or service
center
F01
Continuously
beep Bus Soft Start up
fail
F02
Continuously
beep Bus voltage too
high