Makel MSA-CM Series, Руководство пользователя

Страница: 16 / 48

4 Detailed Functions Description
Figure 2: Channel's General configurations' page.
Table 4: Parameters in Channel's General configurations page.
Parameter Description Values
Use Timer? Selects if the timer functionalities are to
be activated and how. Possible values:
*Not used
Use (normal Start=1; Stop=0)
Use (inverted Start=0; Stop=1)
7 Timer (default value) The length of the delay time. Possible values:
1s, … *10s, ... 1min, 1min 15s, ….
2min, 3min, … 15min, 20min,
… 1h, 2h, … 1day
7 Timer operation mode Defines if the timer start triggers an On or
Off status. Possible values:
*On
Off
7 Allow timer interruption with
Stop? Defines if the timer can be stopped after
starting by sending Stop message. Possible values:
*No
Yes
7 Consecutive presses multiply
time (within 10s)? Defines if the delay time can be
multiplied per n by send multiple Start
messages within 10 seconds. Possible values:
*No
Yes
7 Visible if “Use Timer?” is set to value different than “Not used”.
User’s Manual Page 16