Makeblock mSpider, Руководство пользователя

Страница: 12 / 15

mSpder User Guide
9/ 12
click PenUp and PenDown . When the following effect is observe and obtained, it is possible to set
pen lift mechanism of the steering engine (note: If the rudder arm of the steering engine does
not have the following angle, remove the rudder arm by a cross screwdriver to adjust installation
angle, the rubber band is adjusted for degree of tightness according to requirement, and
pendown is subject to just contact with the paper .
e
）
. The graph is led in the imaginary line box as much as possible, and in case of excess of the
range, it is possible to cause drawn graph abnormal. Lead the following test
graph, …mDrawBot Download Package\Examples of Material\Test\Square.svg for effect test.
( If the graph is deformed or not closed, 1. Inspect AB and AB-O are correct. 2. Adjust
the tightness of the screw, calibrate levelness and so on. 3. Inspect whether 9g Servo
Extension Cord blocks drawing during drawing. 4. See FAQs for details)
Note
：
Software default
value is here, and the value is
subject to the value set
during debugging during use.
Please pay attention to
direction The set parameter
may be stored in the main
board.
Pen Up Pen Down
Rudder
arm