manualshive.com logo in svg

MAKE Belinda Kilby, Начало работы

Поделиться
Скачать
MAKE Belinda Kilby Скачать руководство пользователя страница 92

These systems are usually proprietary and do not offer the user
the chance to modify the software code itself.

Sensors

The heart of the flight controller is the 

inertial measurement unit

(IMU); see 

Figure 4-1

. This unit contains a suite of sensors to

help the flight controller monitor the activity of the aircraft. The
most typical sensors include an accelerometer, gyroscope, and
barometer. These measure the acceleration and rate of rotation
of the aircraft, and the air pressure (which can often be con-

verted to the aircraft’s altitude). These three sensors provide all
the data that the autopilot needs to keep the aircraft stable in

the air.
Additional sensors are also used outside of the IMU for

advanced functionality. These include GPS receivers, magneto-
meters, optical flow sensors, and air speed sensors. As time
moves forward, we will see even more sensors introduced into
flight controllers to help with tasks such as Sense and Avoid,
computer vision, and artificial intelligence (AI).

Figure 4-1. 

This flight controller has a built-in IMU and ports for

external sensors.

80  Make: Getting Started with Drones

Содержание Belinda Kilby














































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды