Make Noise XPO Скачать руководство пользователя страница 15

15

Tips and Tricks

-

Use the second 1v/oct input with a keyboard, sequencer or Pressure Points/0-CTRL for manual or sequenced pitch transposition.

-

When using the 

Wavefolding

 output in Mono

 (Left output only, Right output unpatched)

, the Left side will be weighted slightly

 

heavier in the result than the Right. This

 

weighting lets one set of harmonics be used for accent while the other is the basis of the

 

sound.

-

The PWM and Vari-Timbre Mono outputs feature a normalization of an inverted copy of their Right output. This means that

 

when used in Mono (Left output only, Right output unpatched), the Modulate L/R controls will create more "peaks and valleys" in

 

the outputs due to various phase cancellation possibilities. In general the mono PWM output is more punchy/aggressive than its

 

stereo counterpart, while the mono Vari-Timbre output is more gentle (this is not a hard fast rule!)

-

Any unused waveform output can make a great modulation source for filters such as QPAS, other modules in the patch, or the

 

XPO itself. For example, the Spike wave makes a great frequency modulator for a low pass filter, adding a subtle high frequency

 

sheen back on to sounds that have had their edges shaved off. When the XPO is also the sound source, modulations patched in

 

this way will be "in tune" 100% of the time.

-

Because Center modulation does not affect the Mono outputs or the PWM Stereo Outs, it can be used to subtly or drastically

 

change the Vari-Timbre or Wavefolding outputs while mixing with other outputs that stay unmodulated. Similarly, the Mono

 

outputs are not affected at all by Modulate or Center controls, and can be used as an "anchor" when mixed in with any of the

 

stereo outputs.

-

After removing your patch cable from the FM Depth CV Input, don't forget to turn the Combo Pot back down to remove the Sub

 

FM Normalization ... unless you want to!

-

Use the center parameter for audio rate modulation to create harmonics while the Modulate L/R parameters provide animation 

of those harmonics. 

Содержание XPO

















Отзывы: