Make Noise Strega, Руководство пользователя

Страница: 7 / 39

7
It is not important to fully understand the Strega itself. Only a working knowledge of the typical Make
Noise control structure will be helpful. If you are not already familiar with the typical control structure,
the inputs and outputs utilized on Make Noise instruments, check out page 7 of the 0-Coast manual at
http://makenoisemusic.com/content/manuals/0-coast_manual.pdf.
It is important to approach the Strega with a desire to experiment and an openness to results that might be
outside of your control. With time it will be possible to guide the Strega enough to achieve less mysterious
results should you desire to do so.
Throughout your Strega experiments it is important to use the Level control to set a comfortable volume.
When in doubt, flatten it out and start your experiment with Level turned full CCW, slowly turning CW to
bring up the resulting sound level.
Beginning the Strega Experiment
The most well documented path to learning the Strega begins with Activation. Point all controls to 12:00
(except Level) and then slowly turn up the Level to a comfortable volume. You should hear the Strega.
Use the Activation Constant and Activation Interference controls to change the Strega sound. Turn both
of these controls full CCW and work with one at a time so you might understand them better.
<- Activation Constant
Activation Interference ->