manualshive.com logo in svg

Make Noise MATHS, Руководство пользователя

Поделиться
Скачать
Make Noise MATHS Скачать руководство пользователя страница 4

 

 

Electrocution hazard!

Always turn the Eurorack case off and unplug the power cord before plugging or unplugging any Eurorack

bus board connection cable.

Do not touch any electrical terminals when attaching any Eurorack bus board cable. 

The Make Noise MATHS is an electronic music module requiring 60mA of +12VDC and 50 mA of -12VDC 

regulated voltages and a properly formatted distribution receptacle to operate. It must be properly installed 

into a Eurorack format modular synthesizer system case.

Go to 

http://www.makenoisemusic.com/

 for examples of Eurorack Systems and Cases.

Please refer to your case manufacturers’ specifications for location of the negative

supply. 

-12V

To install, 20HP in your Eurorack synthesizer case, confirm proper installation of included Eurorack Bus

board 

connector cable on backside of module (see picture below), plug the bus board connector cable into the 

Eurorack style bus board, minding the polarity so that the RED stripe on the cable is oriented to the 

NEGATIVE 12 Volt line on both the module and the bus board. On the Make Noise 6U or 3U Busboard, the 

negative 12 Volt line is indicated by the white stripe. 

4

Содержание MATHS





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды