Make Noise 0-CTRL, Руководство пользователя

Страница: 13 / 30

1 3
Quick Start Guide: Sequencing
Once you have made these initial connections and settings, start the Clock using the Clock touchplate (the
CLOCK Window will light white to show that the Clock is going, and the Step Indicator lights will start to
“move” as they are sequenced ) .
You can change the Speed of the sequence with the Speed knob and the Time CV row (Time attenuator
must be turned up in order to control individual step times) .
You can change the Direction of the Sequence with the Direction button.
You can change the Pitch of each note with the Pitch knobs.
You can change the Strength of each note with the knobs of the Strength Channel, if you are using the
Dynamic Envelope to control a VCA or 0-Coast Dynamics circuit.
Turn a knob fully counterclockwise to
turn its Step’s note OFF. This allows for the creation of "rests" and dynamics within a sequence.
( Note: If you are using the Dynamic Gate output to control a CV/Gate synth or envelope generator, most of
these will not recognize any variation in strength aside from “on” or “off.” The 0-Coast Contour circuit is
designed to respond to the Dynamic Gate to create notes of varying Strength.)
The Strength and Time attenuators set the amount of effect the Strength and Time Control Rows will have
on these parameters.
If the attenuators are turned counterclockwise, all notes will be the same length
and the Dynamic Gate and Envelope outputs will not create note events.