Make Mendel PlusBot, Руководство пользователя

Страница: 13 / 26

MAKE MENDEL Page 13
3) Now Between Printbed Support plate and printbed fix the springs using M4 x 50
countersink screws.
4) Springs are to be placed in triangular shape.
5) Now place PCB on Acrylic plate. Cover RED side of PCB with kapton tape, At Bottom of
RED side 4 Pin molex is already soldered which will go to Printrboard . On BLACK side of
PCB Thermistor is placed at the center with Kaptont tape. Open ends of thermistors are
attached to 2 Pin Molex which will go to Printrboard.
6) Use Plastic ties to fix PCB heatbed on Acrylic plate.