Make Mendel MegaBot, Руководство пользователя

Страница: 22 / 29

MAKE MENDEL Page 22
6. Now will assemble belt, follow the below sequence.
 Attaching belt to the ExtruderBase Plate
1) Take the ExtruderBase Plate, apply some glue on side face (this is not must), then just use
Plastic ties to tie it. Start to fix the T2.5 belt from one side of Extruder base plate.
2) Complete the belt round through Pulley, belt Adjuster and Bearing stack at X plate and
finish it to opposite side of extruder base plate.
3) Attach the Extruder base plate on the Rail Block.
4) At the time of assembling belt Keep X plate at the center of Top plate, so that you can
judge how tight belt is to keep.
After Assembling of Complete Extruder