![background image](http://html1.mh-extra.com/html/maka-technologies/marbella-lx1/marbella-lx1_user-manual_3786720035.webp)
35
© 2016 Maka Technologies Group. All Rights Reserved
Getting
Started
Operation of your LX1 FHD Digital Roadcorder
TM
Restore
Factory
Setting (Default Setting)
Set the system parameters to the default value.
1 Press on
twice to enter system setting(
)
2 Press on
UP
or
DOWN
button to navigate to the function that shows
Restore Factor Setting
3 Press on
OK
to enter
and show:
Confirmation or Cancel
4 Press on the
UP
or
DOWN
button to make your selection
5 Press on
OK
to confirm your entry and exit to setting
6 Press on
once to exit Setting and back to recording mode
Playback
Mode (Video)
1 Stop recording by pressing on the
OK
button
2 Press
M
button twice switch from recording to playback mode
3 Press and hold
UP
or
DOWN
button to navigate through the
video/photo files (Video File will have the icon
in the centre of the
screen)
4 Press on
OK
once you have found the file and start playback
5 Press on
OK
again to
PAUSE
playing and
M or
button to
STOP
playing
6
FAST
FORWARD
: Press the
DOWN
button to forward your video by 2sec
with each press
7
REWIND
: Press the
UP
button to roll back your video play by 2sec with
each press
Note : Manual lock of the video footage by pressing the manual lock
icon once to lock or
unlock the footage.