MAK AL-2016A, Руководство пользователя

Страница: 16 / 18

16
3.Installation & Usage of Detector
3.1 Installing guide to avoid false alarm
A . Avoid sunshine or strong light
B . Using high-pow ered alkaline battery
C . Avoid the floating subject, e.g. clothes or curtain, strong w ind may cause false alarming.
D . Avoid facing heating unit, such as air conditioner, refrigerator, fan and so on.
3.2 Installing
Use screw to fix the bracket on the w all, about 2.1m to 2.8m from the ground. (PIC3A or PIC3B)
3.3 Working Mode
Detecting Indicator
：
Detected someone w ithin detecting range, red LED w ill be flashing.
Signal transmitting indicator
：
When transmitting, Green LED w ill be on for.
Low Voltage
：
When the voltage of battery is low, the Blue LED w ill be alw ays on (indicating: time to
replace battery).
Check when power on
：
Every time pow er on, detector w ill enter 1 min self-check mode, and the
Red LED w ill be flashing. If w ithout being triggered, it w ill enter testing mode.
Code learning mode
：
Under testing or w orking mode, press code learning sw itch, the Green LED
w ill be on for 3sec., then enter code learning mode, enter testing mode after 3sec. (PIC5A or PIC4B)
Selecting working time for detector
：
Pull to 180S
，
detector w ill send signal every 180sec. That is
saving pow er. Pull to 10s
，
detector w ill send signal every 10sec. That is for installing test.
3.4 Walk to test
Walk into detect range, it should flash once, start transmitting w ireless alarm signal.
3.5 Code learning
Firstly, enter code learning status, long press code learning sw itch (PIC5A or PIC4B), Green
indicator w ill be alw ays on. When mainframe received that signal, it w ill sound to indicating code learning
finish. If not, please repeat the above operating.
3.6 EXT Power for AL-413W
It is able to connect w ith 12V DC Pow er. Please check PIC4A for pow er socket
（
Default is
unavailable, unless required by user
）