26
♦
The
Tempo3/Tempo4
can be disassembled into fire pieces, the seat (weight 6.2 kg),the
front section (weight
25
kg), the rear section (weight
20
kg),and batteries (weight 11
kg ),without any tools please follow the steps and photographs below:
1. Switch off the scooter.
2. Unscrew the seat hand wheel and remove seat. Be careful not let the seat post drop
when removing.
3. Lift up the rear shroud tore move (as shown in the photographs below).
4. Disconnect the batteries by disconnecting the two red connector and two black
connector. Then, undo the Velcro strap and remove the batteries. Please see the
photographs below.
5. Loosen the tiller adjustment knob and fold down the tiller and retighten knob.
6. Remove the lock pin.
7. Unplug the front-to-rear harness (blue and red connector).
8. Press down the rear bumper to pivot the scooter’s rear section rearwards unit the rear
section is standing vertically on its rear bumper.
9. Lift the front section up until the lower pegs are no longer in the curved locking
brackets. Carefully lift the front section away from the rear section.
