6
Press the ‘Standby/Mode’ button (
Ref.1
) to switch to DAB/DAB+
Radio. On first use it will automatically scan all stations and save
them.
Fully extend the antenna (
Ref.14
).
To auto scan, press the ‘Scan/Snooze’ button (
Ref.2
) and then
release. This will start scanning up the frequency band and store
all stations that have good signal up to 240 MHz. After searching
has finished it will automatically play the first station stored.
To browse through all stations that have been stored, use the
‘Previous’ or ‘Next’ buttons (
Ref.5/6
) to scroll through them.
When on the chosen station, press the ‘Enter’ button (
Ref.9)
to
begin listening to that station.
The radio will display station information when you press the
‘Info/Menu’ button (
Ref.4
). Press multiple times to view all
information available (See page 10).
When you turn the radio on again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
Instructions Guide
DAB/DAB+ Radio
How to store a preset DAB station
To be able to quickly access your favourite DAB stations, you can
preset the stations. Up to 10 different preset stations can be set
for you to browse between.
To store a station as your preset, it is best to be listening to the
station at the time.
Once listening to the station, press and
hold
the
‘Preset’ button
(
Ref.3
). The screen will then display “Preset In [1] stored” will
show on the display. To set the station as preset 1, simply press
‘Enter’ (Ref.9) to confirm your choice.
To set the station as preset number 2 or above, press the
‘Previous/Next’ buttons (
Ref.5/6
) to change the “[1]” to the
number you want to store the station as. Then press ‘Enter’
button (
Ref.9
) to save. The display will then show “Preset [x]
stored”.
How to play a preset radio station
To play your preset radio stations, press the ‘Preset’ button
(
Ref.3
) to enter the preset catalogue.
Use the ‘Previous’ or ‘Next’ buttons (
Ref.5/6
) to scroll through
your preset stations from 1-10.
Once you have found the chosen preset station you wish to play,
press the ‘Enter’ button (
Ref.9
) to select your choice. The station
will now begin to play.
