9
170mm from the other end),so you should use the soundbar
as a template to get the right mounting positions.
•
Place the soundbar away from the work area and then mark
two fixing points 7mm below the light pencil marks for
the screws. These marks should be 470mm apart and level.
Before drilling, use a spirit level to check that the fixing
points marked are level.
•
If fixing to a solid masonry wall, use a masonry drill bit, drill
holes to a depth of approximately 30mm and insert the wall
plugs. Insert the screws into the wall plugs and drive home
the screws until the heads stand proud of the wall by about
1mm.
Instructions Guide
•
If fixing to timber, follow the directions above, but only drill
a small pilot hole for each screw and do not use the wall
plugs provided.
•
If fixing to hollow plaster board walls, use a drill bit suitable
for wood and replace the wall plugs with wall anchors
appropriate for the application. Locate the fixing points into
wall studs and cross braces where possible.
•
Locate the soundbar onto the screw heads and check that
the screws are fully engaged into the keyhole mount before
releasing your hold.
LINE IN
AUX IN
SW.OUT
DC 18V
OPTICAL
470mm
Distance between the holes of two metal brackets
Instructions Guide
