5
EN
Please refer to
page 4
to ensure that your radio is set up correctly�
To auto scan (if the unit has not automatically done so, or has no signal)
press and
hold
the ‘Info/Menu’ button (
Ref.9
). When the display shows
“FULL SCAN”, press the ‘Enter’ button (
Ref.7
).
The unit will start scanning up the frequency band and store all stations
that have a good signal. After searching has finished the first station
stored will play. Please note: signal may be adversely affected if you are
not in an area with good DAB signal�
Use the ‘<’ (
Ref.5
) and ‘>’ (
Ref.8
) buttons to navigate through the
stations stored�
The radio will display station information when you press the ‘Info/
Menu’ button (
Ref.9
). Press repeatedly to view all information available
(See
page 9
).
You can also use “MANUAL TUNE” to scroll through stations by
frequency. To do this, press and
hold
the ‘Info/Menu’ button (
Ref.9
).
When you turn the radio on again after switching it off, it will
automatically tune to the same station (DAB or FM) that was last active.
Instructions Guide
DAB/DAB+ Radio Mode
