Instructions Guide
FM Radio
Press the ‘Stanby/Mode’ button (
Ref.1
) multiple times to switch
between DAB and FM. The first time you do this, the FM
frequency “87.5 MHz” will be displayed on the screen.
Fully extend the antenna (
Ref.13
).
To auto scan, press and
hold
then release the ‘Next’ button
(
Ref.6
). This will start scanning up the frequency band and play
the first station it finds with a strong signal.
To scan down the frequency band, press and
hold
the ‘Previous’
button (
Ref.4
) for a few seconds.
The radio will display station information when you press the
‘Info/Menu’ button (
Ref.2
). Press multiple times to view all
information available (See page 11).
FM Scan Setting
Choose between scanning strong and weak signals (All) or only
the strong stations (Only).
Press and
hold
the ‘Info/Menu’ button (
Ref.2
). To make your
choice, use the ‘Previous’ or ‘Next’ buttons (
Ref.4/6
) to choose
your option.
Select “FM Scan Set” and press the ‘Enter/Scan’ button (
Ref.5
).
Use the ‘Previous’ or ‘Next’ button (
Ref.4/6
) to choose between
“All” or “Only”. Press the ‘Enter/Scan’ button (
Ref.5
) to confirm
your choice.
7
