MAJORITY DX30, Руководство пользователя, Страница: 9 / 12

EN
9
Support
If you require further assistance with your Majority product, please contact our
support team on the Majority website: www.majority.co.uk/support
Troubleshooting
Observation Potential Cause/Solution
Bluetooth does not/could not find the
Majority DX30 on your device
Make sure the Majority DX30 are not paired
with other devices via Bluetooth when
trying to perform a Bluetooth/search
connection.
Make sure the speakers are in Bluetooth
Mode.
If you are having issues connecting via
Bluetooth, try turning off the product and
leaving it switched off for 5 minutes.
Connect to power source again, switch
speakers on, change mode into Bluetooth if
needed, and start the pairing steps again as
described in this user manual.
Bluetooth connected - No Sound
Increase volume on the Majority DX30 and
on your device.
Check and make sure the DX30 are not
paused
AUX connection- Hissing sound
If the Majority DX30 is connected with a
computer or a laptop using AUX cable and
USB cable for charging connected with
same PC, and you experience a hissing
sound, then plug the USB cable to mains
instead of computer/laptop USB port. Only
keep AUX cable connected with PC.
Check and make sure cables are not
crossed over.
AUX connection – No Sound
Disconnect the speakers from device that
you connected with, leave these for 5
minutes and then re-connect with your
device making sure the AUX end cable is
properly inserted. Increase volume on the
Majority DX30 and on your device.
Check audio settings on your device.
Make sure the speakers are in AUX Mode.