MAJORITY CB4A-DAB-WHT, Руководство пользователя, Страница: 21 / 24

19
Troubleshooting Guide
Observation Potential cause/solution
No sound The station is not tuned in . Fine tune the station .
The volume is set to a low position . Increase the volume .
Headphones may be connected . Disconnect the
headphones .
Buttons are not
working
Turn off the unit and turn on after a few seconds .
FM: Static sound
DAB: Burbling/
intermittent cut-out
Signal reception is low . Adjust the aerial or move the unit
to a stonger signal location .
Rescan stations .
Sound is distorted The volume is too high . Adjust the volume control .
Desired station not
found
Weak signal . Use the manual tune function .
Display shows
"No Service"
There is no DAB coverage in your area, or poor reception .
Adjust the position of the aerial, or move the unit to a
stronger signal location .
Display is blank This may occur if the broadcaster changes the label of a
service or removes a label while tuned . The radio will try
to retune or perform a scan .
Time and date
not setting
automatically
For the time and date to set automatically you need to
turn on the system and switch to DAB radio and let this
scan . Then press the ‘Power Mode’ button and the
system will go into standby and the date and clock will
have been updated automatically .