MAJORITY CB3-DAB-WHT, Руководство пользователя, Страница: 5 / 24

Instructions Guide
3
Please note all (Ref.) refer to the Controls and Functions
mapping guide on Page 1.
Basic Operation
Plug the connector into the back of the system labelled DC 5V
(Ref.12) and the power supply into the mains, if the station
needs charging.
Position the Power Supply switch on the back of the system to
‘ON’
(Ref.11) .
Ensure the antenna (Ref.15) is extended as far as possible so that
you can rotate it, enabling you to get the best possible signal.
The radio will be in standby mode showing the time and date.
This will automatically update after the first time you use the
DAB radio.
Press the ‘Power/Source’ button to turn on the unit (Ref.1) .
It will automatically take you to DAB radio mode or the
previous mode you were using.
To change the mode press the ‘Power/Source’ button (Ref.1) to
switch between DAB Radio and FM Radio.
When DAB Radio is activated for the first time it will
automatically start scanning and storing all stations that have a
good signal. If the display shows “No Signal”, press the scan
button. It will take a few minutes for all the stations to be
scanned and saved. Use the ‘Prev’ and ‘Next’ buttons
(Ref.7/8)
to scroll through the stations.