MAJORITY A10-CAR-BLK, Инструкция по эксплуатации

Страница: 14 / 30

12
Connect the car radio adapter to either the window screen
mount or the car vent mount:
Please note that (Ref.) refers to the radio adapter on page 3 and
(MG.x) the window mount diagram on page 2.
Window Screen Mount
On the mounting board of the window screen mount, line
up the back of the car radio adapter (
Ref.2
) to the clips of the
window screen mounting board (
MG.5
)
Now slide the car radio adapter clips up into the clips of the
window screen mounting board. Once they are connected, there
will be a click and bound securely to each other.
To remove the car radio adapter from the mount, simply hold
the radio adapter and pull it down from the window screen
mount to remove it.
To connect the mount and car adapter to the window screen,
choose the desired spot on your window screen and hold it in
place. The mount has a ball fitting to allow you to adjust the
angle of the radio adapter once locked to the window screen.
Now pull down the locking lever (
MG.2
) on the mount to ensure
the mount suctions and locks to the window screen.
Releasing the mount
To remove the mount from the window screen, pull the locking
lever up (
MG.2
) from the mount to unlock it. To remove it, lift the
suction tab (
MG.3
) from the window to stop its suction to the
window.
Step 5: Connecting to your chosen mount
Installation