Select “YES” to continue with the setup. If you select “NO”, the next display asks you whether the setup wizard
should be started the next time the device is switched on.
Time/Date Display format
Select 12hr or 24hr as the time format.
Auto Update
The time and date can be updated manually or automatically from DAB, FM or network.Auto update works
with data sent over DAB, FM or the Internet. The clock is only updated when it is in a corresponding mode, so
it is suggested to select a mode you use regularly. DAB and FM use time signals broadcast with radio
transmissions. Network uses a time signal sent from the Internet radio portal when in any network connected
mode.
Time Zone
Set your time zone. If your country uses daylight saving and it is in effect, turn on the Daylight saving option
(only available when Auto update from Internet is selected).
Manual update
If you set No update, the wizard prompts you to set the time and date manually. The date and time are
displayed as dd-mm-yyyy and hh:mm.
The active value appears as ashing. Adjust each value with the “NAVIGATE” knob. Once the value is set,
press the knob to continue setting with next value.
Network
Keep Network connected
Select this option when the unit’s network connection is in standby. When the function is con rmed, the unit
will quickly connect to the internet and it is possible to switch on the unit with the “UNDOK” app. The standby
power consumption is slightly increased with this function.
WLAN region
Select the WLAN region to obtain the optimal WLAN connectivity: Europe.
Scanning for the network
Homerton 2 is compatible with all common network protocols and encryption methods. It searches for the
available networks and list them out for you.
There will be hints for the type of network – if your network devices support WPS function, it will be [WPS]
before the SSID (the name of the network device). Select the one you want to connect.
For the wireless connection, you will be asked to input the encryption in the next step (WiFi only!). To enter the
network’s key, use the “NAVIGATE” knob to move the cursor through the characters and press “OK” to
con rm. As each character is selected, the key is built up near the top of the display.
There are three options accessible by tuning the navigate reel back before the rst characters – Backspace,
OK and Cancel.
WPS encrypted network
WPS encrypted networks are identi ed by WPS at the start of the network name when the Homerton 2
searches the available AP. Use one of the following methods of connection: There is the shortcut WPS key on
the unit.
Push button
Homerton 2 prompts you to press the connect button on the router. It then scans for a ready Push Button
Connect network and connects.
Pin
Homerton 2 generates an 8-digit code number which you enter into the wireless router, access point, or an
external registrar.
