1. The unit will automatically turns to standby mode when no audio input is received for 20 minutes.
The sound bar will wake up from standby mode when any button is pressed or source input is received.
2. If the TV or the external unit is disconnected, switched it off
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.
3. The screen will be turned off for around 10 seconds without any operation, when pressing the power buttons on the
sound bar or on remote control or the using phone's volume increase or decrease, the display will be waken up again.
2. Below are input mode names appearing in the sound bar display:
The port of HDMI in and HDMI(ARC) are support Video & Audio
Video: max supported video content 1080p / 4K / HDR / 60fps
Audio: maximum supported audio content is Dolby Atmos, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, Dolby Surround.
HDMI: HDMI version 2.0
-Bluetooth Pairing mode, -AUX mode, -Optical mode, -HDMI 1 mode,
-HDMI 2 mode, – HDMI (ARC) OUT mode, -USB mode
Auto Standby
1. Press the button repeatedly on the soundbar or press the INPUT button on the remote control to select
the BT, AUX, OPTICAL, HDMI ARC, HDMI 1, HDMI 2, USB mode. The selected mode will show on the display.
Select Modes
Through Bluetooth, connect the Soundbar with your Bluetooth device (such as an iPad, iPhone,iPod touch,
Android phone, or laptop), and then you can listen to the audio files stored on the device through your
Soundbar speakers.
What you need
• A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and with Bluetooth version as 5.0.
• The maximum operational range between the Soundbar and a Bluetooth device is approximately 8 meters (26.2 feet).
1. Turn on the sound bar and short-press button repeatedly on the unit or
INPUT
button on the remote
control to switch the sound bar to Bluetooth model and LED display on the sound bar will flicker in the
Bluetooth pairing mode.
2. On the Bluetooth device, switch on Bluetooth, search for and select
Majority Sierra Plus
on your Bluetooth list to start
connection (see the user manual of the Bluetooth device on how to enable Bluetooth) if prompted for a password,
please use “0000”.
3. Wait until you hear the voice prompt from the Soundbar. If the successfully connected, stops flickering and
is displayed on the display panel.
Playing Audio via BT Connection
12
