- 6 -
8
9
11
10
12
13
Clarifier
The Clarifier adjusts the frequencies of the Transmitter and receiver very slightly in order to ensure
that Sideband [USB or LSB] signals are heard correctly. When using LSB and USB, adjust the Clarifier
to obtain the most pleasing (normal) range of voice tones. Varying this control to either extreme
varies the tone of the voice from a high pitch to a barely intelligible low tone.
Mode switch
Rotate to select to “AM”, “FM”, “LSB” or “USB”.
NOTE: When using the UK FM (CB 27/81) Band, the Mode must be set to “FM”.
Squelch
The squelch function cuts-off all signals to the receiver at a variable level and is used to silence
background noise, static or distant stations. Rotate the Squelch control Clockwise until the desired
level is reached.
PA
Rotating the squelch control fully anti-clockwise engages the PA Function. To use the PA press the PTT
button on the microphone. Adjust the output volume using the Volume knob.
NOTE: Always ensure a PA Horn or suitable speaker is connected to the CB before using this function.
Volume
The Volume control determines the volume that the received signal is heard (or, if PA is in use, the
output volume). Rotate the control Clockwise to increase Volume. Rotate Anti-clockwise to decrease,
and fully anti-clockwise to switch the CB Off.
Channel selection Rotary Switch.
Rotate to select any of the forty channels within each Band.
Note: The Volume, Squelch, Clarifier, and Loc-Dx, controls are inoperative when transmitting.
Controls and Functions (Cont’d)
88
HI
HI BAND
UK 40
LO BAND
LO
LOC
OFF
DX
HI
SQUELCH
CLARIFIER
VOLUME
LSB FM
USB AM
OFF
PA
SIGNAL
1 3 5 7 9
AM/FM/SSB
M 360
.
.
. .
..
.
.
.
. .
..
.
.
.
. .
..
.
..
..
1
2
3
4
5
6
7
8
9
10
11
12
13
