manualshive.com logo in svg

Major CYCLONE MJ30-920, Руководство оператора и список запчастей

Поделиться
Скачать
Major CYCLONE MJ30-920 Скачать руководство пользователя страница 19

www.major-equipment.com

15

Operating the Machine/Mowing

Never place limbs under the machine while rotors are turning. Rotors can remain turning for up to 1 minute 

after disengaging PTO.

While operating this machine the PTO input rate should not exceed the RPM stated in the Product 

Specifications section of this booklet. Always operate on level ground when connecting/disconnecting the 

implement. This will prevent dangerous movement.

Never allow anyone to stand between the tractor and the machine. Ensure the machine is attached correctly 

to the tractor as previously described. Always start up the tractor PTO at a low RPM. Build up to operating 

speed, select a suitable forward gear & proceed to cut grass.

1. 

Hitch the machine as outlined in the previous section. Ensure bystanders are clear from the machine & cannot be 

hit with debris expelled from the machine. 

2.  The Parking Stand must be placed into mowing position

3.  Check PTO shaft is fully engaged on tractor PTO splines.  

4.  Lower the machine by hydraulic control to the ground or use tractor linkage controls.

5.  After clearing the vicinity of bystanders, relocate the Wing Transport Locking Bars. Lower the wings by hydraulic 

control. Ensure hydraulic ram is fully closed.

6.  Start up the tractor PTO at a low RPM.

7. 

Build up to operating speed, select a suitable forward gear & proceed to cut grass.

Move Ram Stops down for mowing. Ram 

Stops limit the wing lift and prevent damage 

to wing PTO shafts and gearboxes.

Содержание CYCLONE MJ30-920















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды