Major CYCLONE MJ30-350 Скачать руководство пользователя

Страница: 21 / 88

www.major-equipment.com

C:\VaultCAD\Designs\Cyclone\MJ30-350\MJ30-350-GA1.iam

Castor wheel

(if applicable)

Always perform the adjustments on a level ground with the PTO disconnected.

The height of the castor wheels can be adjusted. To do so unscrew the castor wheel arm mounting bolts, locate the

arm in the desired position and secure by tightening the bolts. Repeat the steps for all other wheels on the machine.

Castor wheel arm

Castor wheel yoke

Castor wheel

Castor wheel arm mounting bolts

Castor wheel yoke mounting bolts

Roller and skid setup

Always perform the adjustments on a level ground with the PTO

disconnected.

Roller and skids must not become detached from the machine.

Skid height can be changed by locating the skid in different skid

adjustment slots.

2. Roller position must be adjusted to suit the working conditions.

3. Ensure the machine is always running parallel to the ground. The front

of the machine must not be lower than the back. If required, connect

and adjust the check chains as described previously. Lock tractor arms

in position if check chains are not used.

Check chains

Chain adjusters

Roller

Skid

Skid adjustment slots

Roller height adjustment slots

Roller pivot arm

GROUND LINE

Содержание CYCLONE MJ30-350

























































































Результаты поиска

Содержание CYCLONE MJ30-350

Отзывы:

Похожие инструкции для CYCLONE MJ30-350

Бренды по названию

Популярные бренды

Major CYCLONE MJ30-350, Руководство оператора и список запасных частей

Результаты поиска

Содержание CYCLONE MJ30-350

Отзывы:

Похожие инструкции для CYCLONE MJ30-350

Бренды по названию

Популярные бренды