![background image](http://html1.mh-extra.com/html/major-tech/mt730/mt730_instruction-manual_3796844010.webp)
10
4.2. HOLD/Flashlight Button
• To freeze the LCD reading, press the
Hold/Flashlight
button.
• While data hold is active, the
HOLD
icon appears on the LCD.
• Press the
Hold/Flashlight
button again to return to normal
operation.
• Press the
Hold/Flashlight
button to turn the Flashlight on, Press
again to turn the Flashlight off.
4.3. RANGE Button
• Press the
RANGE
key to activate the manual mode and to disable
the Autorange function.
• The symbol "AUTO" disappears from the upper left part of the
display.
• In manual mode, press the
RANGE
key to change measuring
range: the relevant decimal point will change its position.
• The
RANGE
key is not active in positions , CAP, Hz%, Temp.
• In Autorange mode, the instrument selects the most appropriate
ratio for carrying out measurement.
• If a reading is higher than the maximum measurable value, the
indication "'
0L'
" appears on the display.
• Press and hold the
RANGE
key for more than 1 second to exit the
manual and restore the Autorange mode.
4.4. PEAK/INRUSH Button
• In AC voltage test mode, press
PEAK/INRUSH
key, the peak
maximum and peak minimum values can be measured.
• In current test mode, Press
INRUSH
key the inrush current values
are measured.
4.5. REL/Backlight Button
• Press the
REL
button to view the stored value.
"REL"
will flash in
the display.
• To exit this mode, press and Hold the
REL
button until
"REL"
is no
longer in the display.
• DCA measurements press the
REL
button to zero the display
• Press and hold the
REL/Backlight
button to turn the Backlight on,
press and hold again to turn the Backlight off.
Содержание MT730
Страница 1: ...INSTRUCTION MANUAL AC TRMS CLAMP METER MT730 II...
Страница 2: ...2...
Страница 15: ...15...