Major tech MT715, Инструкция по эксплуатации

Страница: 13 / 16

13
6. Button
6.1. MODE and Backlight Button
• Press MODE and Backlight Button to select OHM/Diode/Continuity/CAP/
LoZ AC/DC Voltage.
• Press the MODE and Backlight button for over 1 second to turn the
button, Knob and Rotary light on.
• Press again for over 1 second to turn the button, Knob and Rotary light
off.
6.2. MAX/MIN Button
• Press MAX/MIN Button the maximum and minimum values are
measured.
• This mode is activated on each measurement except for continuity test,
diode test, capacitance test and AUTO SENSE Voltage mode.
• This mode is disabled keeping pressed MAX/MIN Button or moving the
rotary switch.
6.3. DATA HOLD and Flashlight Button
• To freeze the LCD reading, press the HOLD and Flashlight Button.
• While data hold is active, the HOLD icon appears on the LCD.
• Press the HOLD and Flashlight Button again to return to normal.
• Press the HOLD and Flashlight Button for over 1 second to turn the light
on.
• Press again for over 1 second to turn the light off.
7. Automatic Power OFF
• In order to conserve battery life, the meter will automatically turn off
after approximately 15 minutes.
• To turn the meter on again, turn the function switch to the OFF position
and then to the desired function position.
• To press and hold the MODE and Backlight Button to turn the
system on, the auto power off function will be cancelled.