6
4.2. USING THE THERMOCOUPLE (S)
1. Plug the thermocouple(s) into the T1 input connector(s).
2. Press to turn on the thermometer. After 1 second the thermometer
displays the first reading. If no thermocouple is plugged into the
selected input or the thermocouple is "open," the display shows"- - - -".
4.3. CHANGING SETUP OPTIONS
Use Setup to change offset, sleep mode settings. The thermometer stores
the settings in its memory.
4.4. SETUP OPTIONS
Option
Menu item
Settings
Type
TYPE
K or J
Offset
OFFSET
T1
Sleep Mode SLP On
(sleep mode on) or OFF
(sleep mode off)
4.5. ENTERING OR EXITING SETUP
When the thermometer is in Setup mode, the display shows SETUP.
Press to start or exit Setup.
4.6. CHANGING SETUP OPTION
1. Press or to scroll to the setup option you want to change.
2. Press to indicate that you want to change this setting.
3. Press or until the setting you want to use appears on the display.
4. Press to store the new setting in memory.
Notes:
Setup is disabled in
MAX MIN
mode .
5. OFFSET
The primary display shows the temperature plus the offset and the
secondary display shows the offset. You can store individual offsets for T1.
When the thermometer is in Setup mode, the display shows SETUP.
Press or to scroll to the T1 or T2 offset setup option page. Press
to indicate the T1 or T2 offset in Secondary Display. Press or until the
setting you want to use appears on the display (fig.1). Press to store
the new setting in memory.
Содержание MT630
Страница 1: ...INSTRUCTION MANUAL SINGLE CHANNEL DIGITAL THERMOMETER MT630...
Страница 2: ...2...
