Major tech MT245, Инструкция по эксплуатации

Страница: 4 / 20

4
1. PRODUCT SUMMARY
1.1. Product Profile
The MT245 Battery Tester adopts currently the world's most advanced
conductance testing technology to easily, quickly and accurately measure
the actual cold cranking amps capability of the vehicle starting battery,
healthy state of the battery itself, and common fault of the vehicle starting
system and charging system, which can help maintenance personnel to
find the problem quickly and accurately, thus to achieve quick vehicle
repair.
Ÿ Test all automotive cranking lead acid battery, including ordinary lead
acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery,
EFB battery, etc.
Ÿ Directly detects bad cell batteries.
Ÿ Polarity reverse connection protection, reverse connection will not
damage the tester or affect the vehicle and battery.
Ÿ Directly test the battery with loss of electricity, no need to fully charge
before testing.
Ÿ Testing standards include currently the world's majority of battery
standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
1.2. Product Function
Main functions of the MT245 battery tester include: battery test, starting
system test, charging system test and other additional functions.
Battery test is mainly targeted to analyze the battery healthy status to
calculate the actual cold cranking capability of the battery and the aging
extent, which provide reliable analysis evidence for the test and
maintenance of the battery. It notifies the use to replace the battery in
advance when the battery is getting older.
Starting system test is mainly to test and analyse the starting motor.
Through testing the actual required cranking current and cranking voltage
of the starting motor, it can find out whether the starting motor works
fine. There are several reasons why the starting motor is abnormal:
lubricating system fault causing the starting loaded torque increasing or
rotor friction of the starting motor causing the increasing friction of the
starting motor itself.
Charging system test is to check and analyse the charging system,
including generator, rectifier, rectifier diode, etc., thus to find out whether
the output voltage of the generator is normal, the rectifier diode works
fine and the charging current is normal. Suppose one of the above
mentioned parts is not in a normal situation, it will lead to over charge or
incomplete charge of the battery, thus the battery will be quickly damaged
and also greatly shorten the using life of other loaded electrical appliance.