TEMPERATURE MEASUREMENTS
1.
Set the function switch to the
green
Temp
position.
2.
Insert the Temperature Probe into
the input jacks, making sure
to observe the correct polarity.
3.
Press the
MODE
button to
indicate “
ºF
” or “
ºC
”
4.
Touch the Temperature Probe
head to the part whose
temperature you wish to measure.
Keep the probe touching the
part under test until the reading
stabilizes (about 30 seconds).
5.
Read the temperature in the display.
Note:
The temperature probe is fitted with a type K mini connector.
A mini connector to banana connector adaptor is supplied for
connection to the input banana jacks.
CAPACITANCE MEASUREMENTS
WARNING:
To avoid electric shock, disconnect power to the unit under test and discharge all
capacitors before taking any capacitance measurements. Remove the batteries and unplug
the line cords.
1.
Set the rotary function switch to the
green
Ω CAP
position.
2.
Insert the black test lead banana
plug into the negative
COM
jack.
Insert the red test lead banana
plug into the positive
V
jack.
3.
Press the
MODE
button to indicate
“
F
”
4.
Touch the test leads to the
capacitor to be tested.
5.
Read the capacitance value in the
display
FREQUENCY (DUTY CYCLE) MEASUREMENTS (ELECTRONIC)
1.
Set the rotary function switch to the
green
Hz/%
position.
2.
Insert the black lead banana plug into
the negative
COM
jack and the red
test lead banana plug into the positive
Hz
jack.
3.
Touch the test probe tips to the circuit
under test.
4.
Read the frequency on the display.
5.
Press the
MODE
button to indicate
“
%
”.
6.
Read the % duty cycle in the display.
