Once you have several holes
drilled you can drill out between
the webs.
Once the webs have been
drilled out the cutter can be
moved in and out up and down
to clean out the pocket.
PAGE 6
Copyright 2012—Major Manufacturing Inc
When the pocket has been
completed, the lock function
holes can be drilled. Make sure
the mortise bit has been pulled
out of the pocket!
The template shown is for a
Schlage Mortise Lock, most of
our HIT-66 Series will work with
the mortiser. Follow the direc-
tions for the template used.
Here the spindle hole is being
drilled to the mortise pocket.
Thru bolt holes being drilled on
both sides of the door.
