Majestic UAM76, Использование и обслуживание, Страница: 31 / 32

31
INSTALLER
INSTALLATION
FUME EXHAUST CONNECTION
DUCTING/SUCTION VERSION
This type of hood is equipped with a top air outlet for
discharge of fumes outside the house, which has to be
connected with the inlet of the building chimney,
commonly through a hose (not provided).
Horizontal tube sections must be slightly tilted upwards,
to help channelling of the air to the outside.
Fume discharge tubes crossing particularly cold
environments
(e.g. attics) should be insulated, to prevent condensation
caused by temperature differences.
Suction type hoods DO NOT require carbon filters, which,
on the contrary, can limit their performance.
Any changes to the tube, sudden diameter reductions,
and bends, may prevent the hood from reaching
optimum suction capabilities, and may jeopardise the
operation of the motor, relieving the Manufacturer from
all responsibility.
Make sure that the flue is in perfect working order, and
that a square (concrete) or round (metal) static wind
break ventilation tower with useful output section not less
than double the diameter of the flue is installed at
the top of the flue itself.
cappa ad
evacuazione
esterna
vapori
fumi e
fumi e
vapori
cappa
a ricircolo
interno
metallici
metallici
carbone
attivo
external
evacuation
hood
metal
filters
fumes and
steam