Majestic TT 34R BT/CD/TP/USB, Руководство пользователя

Страница: 17 / 26

PREPARATION FOR USE
- Carefully remove the unit from the display carton and remove all packing material
from the unit.
- Place the unit on a stable, level surface, convenient to an AC 230V, 50Hz outlet out
of a strong magnetic field.
- Raise the lid to expose the phonograph. The phonograph has been secured for
shipment with a transit screw. Use a coin or screwdriver to turn the transit screw
clockwise. This will allow the turntable to "float".
- Remove the opaque white plastic stylus from the phonograph stylus by it in the
direction of the arrow.
- During this operation pay attention to the stylus, because the stylus damage is not
covered by guarantee.
- Remove the twist-tie that was used to secure the tone arm during shipment.
- Release the tone arm lock lever.
POWER SOURCE
This system is designed to operate on AC/DC 220-240V, 50Hz, DC12V 2A (adaptor
included). Attempting to operate from any other power source may cause damage
to the system, and such damage is not covered by your warranty.
IMPORTANT RAISING AND LOWERING THE PHONOGRAPH LID
To open the lid, raise it as far as it will go until the lid support bracket 'locks' in the
open position.
To close the lid, pull forward the lid support bracket to release and then gently
lower the lid.
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED.
ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET.
TRANSIT SCREW
STYLUS COVER
TONE ARM
LOCK LEVER
16