Majestic SB5400 Скачать руководство пользователя страница 34

33

53D9026

l

IMIted

 w

arranty

What is Covered and For How Long

• 

Five-Year Coverage

 - For five years from the date this fireplace and components are first purchased for use, 

MHSC will, at its option, repair or replace any defective part of this fireplace or components, or refund to you a sum 

not to exceed the factory retail price in effect at the time of purchase.

• 

Ten-Year Coverage

 - From the sixth through the tenth year following the date this fireplace or accessory is first 

purchased for use, MHSC will make available to you, at our factory, a free replacement for any defective part in this 

fireplace or accessory.

• 

Twenty-Five-Year Availability of Replacement Parts

 - From the eleventh through the twenty-fifth year following 

the date this fireplace or accessory is first purchased for use, MHSC will make available at our factory replacement 

parts for this fireplace or accessory, which you may purchase for the list price current at the time your purchase 

order is received.

What is Not Covered

This limited warranty does not cover:

• 

Transportation or shipping cost.

• 

The cost of a service call to diagnose trouble.

• 

Painted surfaces.

• 

Damage or defect caused by improper installation, accident, misuse, abuse or alteration.

• 

Poor ventilation of smoke or gases caused by air-conditioning and heating systems, exhaust fans or pressure dif-

ferentials produced by wind.

• 

Broken glass components.

• 

Cracks in ceramic and castable parts that do not affect safe operation.

• 

We do not warrant this fireplace to be in compliance with your local building code. Building codes vary greatly 

throughout the country, and you should determine whether your local building code contains restrictions on the use 

of this fireplace before you purchase it.

• 

Blowers or fans, which are warranted separately.

• 

Heat loss due to the passage of heat or air through or around the fireplace.

Also, under our five year coverage, we do not pay the cost of removal and replacement of any portion of the structure 

in which the fireplace is situated, made necessary by the repair, removal or re-installation of the fireplace.
And under our twenty-five year warranty of availability of replacement parts, we only promise to maintain a supply of 

replacement parts at our factory for you to purchase.

Limitations and Exclusions

1.  No one has authority to add to or vary this limited warranty, or to create for MHSC any other obligation of liability in 

connection with this fireplace and accessory.

2.  MHSC shall not be liable for incidental, consequential, special or contingent damages you might suffer as a result 

of its breach of the written warranty or any implied warranty. Some states do not allow the exclusion of limitation of 

incidental or consequential damages, so the above limitations may not apply to you.

3.  This warranty applies only to the original purchaser of the fireplace or to the original owner of the dwelling when the 

fireplace is installed in a new dwelling and may not be transferred.

4.  This warranty applies only to a fireplace sold and used in the United States.

Your Duties

This fireplace must be installed by a qualified installer according to your local building codes and installation instruc-

tions and operated according to the owner’s instructions. You must keep an invoice, canceled check or payment 

record to verify the purchase date of the fireplace.

If Warranty Service is Needed...

1.  Contact your supplier. Make sure you have your warranty, your sales receipt and the model/serial number of your 

MHSC product.

2.  DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

FACTORY-BUILT FIREPLACE AND COMPONENTS

(except blowers)

Содержание SB5400





































Отзывы: