3.1 Operating the SATPOS20D
3.2 The Satellite Acquisition with the SATPOS20D system
■
Turn on the power to the TV and satellite receiver
■
Turn on the receiver using the POWER switch
☺
Under normal conditions, the SATPOS20D will acquire the correct
satellite and produce television programming in less than 1 minute.
To minimize the time it takes the antenna system acquiring the
satellite, do not change the channel during the startup process.
3.2.1 Power on
3.2.2 Changing Channels
If you have followed the installation instructions, your system should be set to
the satellite of your choice and the system should have downloaded the
appropriate channel guides. When the SATPOS20D system and satellite
receiver is properly configured, it is easy to change the channel using the
remote control that normally comes with the receiver unit.
3.2.3 Watching TV at stationary location
The SATPOS20D is designed to operate as efficiently and as reliably as possi-
ble when the vehicle is parked. It is also the quickest satellite acquisition sys-
tem available among the Dome Positioner antennas. After parking the vehicle
and confirming that the antenna is receiving the satellite signal, you may turn
off the IDU to avoid unnecessary use of power. Because the LNB receives its
power from the ODU, and the antenna will continue to receive the satellite TV
signals and relay them to the receiver
.
Majestic Global NZ Ltd.
12
3 Operation
3.2.3 Memorizing the satellite position
Your new SATPOS20D system has a built-in function that remembers the po-
sition of satellite which has been tracked and acquired. If you move a vehicle
from the location where you have watched satellite TV programs, pressing Sat
Locate button will make satellite acquisition fast without the full search.
The SATPOS20D system is easy to use.
Under normal conditions, operation of the SATPOS20D requires no
intervention from the user. Antenna unit initialization and satellite
acquisition is completely automatic.
The vehicle should be stationary for start-up and watch TV.
